Connect all your safety components to a single network

In addition to light curtains, peripheral I/O units such as safety components can also be connected so that safety circuit signals can all be transmitted to CC-Link Safety and be centrally controlled.

Wire-saving! Easy connection to the SF4B series of light curtains

Up to two sets of the SF4B series of light curtains can be easily connected using connectors. (If a terminal block is used, more than two sets can be connected.)

Terminal block can be installed and removed
Because the terminal block can be installed and removed with the cables still attached, the man-hours required for maintenance is greatly reduced.

Muting control can also be set using sequence program

Light curtain muting can also be controlled by means of a program, so that the line will only stop when a person passes through, and will not stop when a workpiece passes through.

・Muting control
This carries out control so that the line will not be stopped when an object passes in between the emitter and receiver of the light curtain. The line will be stopped when a person passes between them.
When two or more of the four muting sensors are interrupted simultaneously, the cause is judged to be an object passing through. This prevents the line from stopping when an object passes through the light curtain, thereby maintaining productivity.
Refer to SF4B series catalog for details.