Freely configurable zones

Two zones can be widely monitored with the SD3-A1, the warning zone (within a radius 15 m 49.212 ft) and the detection zone (protection zone) (within a radius 4 m 13.123 ft). The contours of these zones are fully configurable for a perfect fit in every application. Up to eight zone patterns can be set and switched over at any given time, even during operation.

■Flexible zone configuration by PC

■Up to 8 freely switchable zone patterns

Smallest size in its class*

W140 x H195 x D135 mm W5.512 x H7.677 x D5.315 in smallest in class.
* In the class of detection zone 4 m 13.123 ft. Based on research conducted by SUNX as of July 2008.

Monitors beam misalignment after installation of safety laser scanner

By activating the reference boundary function which enables constant detection of stationary objects, the safety laser scanner memorizes the position of stationary objects, and monitors for beam misalignment after installation.

Adjustment of response times enables interference prevention

The response time is adjustable within the range from 80 to 640 ms. When setting up multiple safety laser scanners in close vicinity, mutual interference can be prevented by adjusting the response time.

Memorized configurations make post-maintenance recovery easy (Optional)

Configurations can be saved in the optional configuration plug which has a built-in memory. Even after maintenance or interchanging of safety laser scanners, the configurations from the memory in the plug can be easily loaded and recovered without the need to configure through a PC.