DIMENSIONS (Unit: mm in)
PE-□
Sensor
Asia (PE-□)
Note:
The figure illustrates the indicator position for PE-21□ (positive pressure).
For the vacuum pressure type, the indicator position is symmetrically opposite.
The figure illustrates the indicator position for PE-21□ (positive pressure).
For the vacuum pressure type, the indicator position is symmetrically opposite.
North America (PE-□N)
Note:
The front view is the same as that for the Asia type.
The front view is the same as that for the Asia type.
Europe (PE-□E)
Note:
The front view is the same as that for the Asia type.
The front view is the same as that for the Asia type.
MS-PE-1
Sensor mounting bracket (Optional)
Material:
Cold rolled carbon steel (SPCC)
Two M3 (length 8 mm 0.315 in) screws with washers are attached.
Cold rolled carbon steel (SPCC)
Two M3 (length 8 mm 0.315 in) screws with washers are attached.
Assembly dimensions
Mounting drawing with PE-2□
MS-PE-2 MS-PE-3
Panel mounting bracket, front protection cover (Optional)
Assembly dimensions
Mounting drawing with PE-2□
Material:
Polycarbonate (Front protection cover)
Nylon 6, Polyacetal (Panel mounting bracket)
Polycarbonate (Front protection cover)
Nylon 6, Polyacetal (Panel mounting bracket)
Panel cut-out dimensions
Note:
The panel thickness should be 1 to 3.2 mm 0.039 to 0.126 in.
The panel thickness should be 1 to 3.2 mm 0.039 to 0.126 in.