DIMENSIONS (Unit: mm in)
NX5-M10RA NX5-M10RB NX5-M30A NX5-M30B
Sensor
Notes:
1) It is the power indicator (red) on the emitter of NX5-M30□.
2) Not incorporated on NX5-M30□.
3) Not incorporated on the emitter.
1) It is the power indicator (red) on the emitter of NX5-M30□.
2) Not incorporated on NX5-M30□.
3) Not incorporated on the emitter.
NX5-PRVM5A NX5-PRVM5B NX5-RM7A NX5-RM7B
Sensor
Note:
Not incorporated on NX5-RM7□.
Not incorporated on NX5-RM7□.
NX5-D700A NX5-D700B
Sensor
MS-NX5-1
Sensor mounting bracket (Optional)
Material:
Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Two M4 (length 25 mm 0.984 in)
screws with washers and two M4 nuts are attached.
Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Two M4 (length 25 mm 0.984 in)
screws with washers and two M4 nuts are attached.
Assembly dimensions
Mounting drawing with the receiver of NX5-M10R□
MS-NX5-2
Sensor mounting bracket (Optional)
Material:
Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Two M4 (length 25 mm 0.984 in) screws with washers and two M4 nuts are attached.
Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Two M4 (length 25 mm 0.984 in) screws with washers and two M4 nuts are attached.
Assembly dimensions
Mounting drawing with the receiver of NX5-M10R□
MS-NX5-3
Sensor mounting bracket (Optional)
Material:
Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Two M4 (length 25 mm 0.984 in) screws with washers and two M4 nuts are attached.
Cold rolled carbon steel (SPCC)
(Uni-chrome plated)
Two M4 (length 25 mm 0.984 in) screws with washers and two M4 nuts are attached.
Assembly dimensions
Mounting drawing with the receiver of NX5-M10R□
